MrQuallzin 18 hours ago • 92%
Then go read a book
MrQuallzin 21 hours ago • 100%
We wear them in the pharmacy as well. No risk of getting them dirty with blood or anything, they're just clothes.
MrQuallzin 1 day ago • 100%
It's a pretty good shitpost
MrQuallzin 3 days ago • 100%
And they sweat milk!
MrQuallzin 5 days ago • 95%
It may try to connect to open wifi networks instead, maybe
MrQuallzin 5 days ago • 100%
It'd be cheaper, sure. But that assumes anyone actually wants to run things locally. My VP is an elderly woman who would love to get off the Board as well. We just don't have volunteers to run things. I joined up so our HOA didn't get handed to a lawyer to run, which would cost even more.
Prior to having a management company, the HOA treasurer embezzled about $40,000. It's the reason they got the management company in the first place.
MrQuallzin 6 days ago • 100%
From an article I read last week, it's an accessibility thing. Front window needs to be low enough for short carriers, and the vehicle needs to be tall enough for a tall carrier to stand in.
Looks silly, but pretty well thought out.
MrQuallzin 6 days ago • 100%
Getting out of it is the hardest part for us right now.
We're in a small 28 unit condominium, so our dues go towards insurance for all buildings (only exterior, have to have our own for studs in), water, lawn service, management company, etc. Our dues are almost $400/month.
Yes, per month. It absolutely blows, especially when we're trying to sell our unit and it's been on the market for almost half a year.
I'm the HOA president so I know what all our expenses are (and have fought to keep increases to a minimum, including negotiating the community water bill with the water company), and unless we kick out the management company (Not going to happen) the dues are just going to stay high. We're preparing to refuse an increase for the next year.
MrQuallzin 7 days ago • 100%
Burgers can often have onions
MrQuallzin 1 week ago • 100%
My guess is that it may not be factoring traffic conditions for bicycle directions
MrQuallzin 1 week ago • 66%
It's also flared as being covered by other news articles. Not worth a ban, but people's feeds shouldn't be filled with every news article for every event, so I'd agree with the post being un-needed.
MrQuallzin 1 week ago • 100%
Commenting so I remember to come look at this thread later. I'd love to know as well!
MrQuallzin 2 weeks ago • 100%
Guessing it's the Litter Robot? We've got one as well. Our youngest cat constantly tries to play in it while it's doing a cycle
MrQuallzin 2 weeks ago • 100%
Yeah, this isn't uplifting at all. It's just sad
MrQuallzin 2 weeks ago • 75%
This is a great thread for finding new people to block
MrQuallzin 2 weeks ago • 100%
It's a reference to the mold growing in her house
MrQuallzin 2 weeks ago • 97%
"I don't care that it's in the shape of a whale!" is now my new favorite phrase and I now plan on 3D printing that to hang on my wall
MrQuallzin 2 weeks ago • 95%
They already do when you leave a mess or destroy property. That's not unusual and acts as a deterrent
MrQuallzin 3 weeks ago • 100%
Good ol' AI generated text
MrQuallzin 3 weeks ago • 100%
My mistake. Misread the comment while at work
MrQuallzin 3 weeks ago • 100%
I've watched through the series a few times now. It's pretty darn good. Not for everyone, but highly enjoyable
MrQuallzin 3 weeks ago • 75%
I love my 3 monitor setup 🥲
MrQuallzin 3 weeks ago • 100%
Fun fact! Glue is put into the cheese on pizza slices for promotional purposes. It's what gets them that nice stringing stretching cheese on video.
MrQuallzin 3 weeks ago • 90%
Got any peer reviewed scientific evidence for your positions?
MrQuallzin 3 weeks ago • 100%
Trying to surpass Endwalker would be a feat. How do you go above flying to the edge of existence and destroying the concept of nihilism? Dawntrail wasn't as grandiose in its story, but overall it was FUN, which is the important part to me. I read an article ago saying this was a better Stormblood which I'd agree with.
MrQuallzin 3 weeks ago • 100%
I've got both going for dual cloud backup. Immich is hosted local so I've got a backup at home, and I pay $5/month for 500GB storage with Google
MrQuallzin 3 weeks ago • 100%
It's a pretty great tool. Downloaded the entirety of Murder Drones on Saturday to add to my Plex server. Strictly for preservation, going to re-watch on YouTube to support them
MrQuallzin 4 weeks ago • 100%
It's a pretty good introduction for those who don't care for swearing and sexual jokes. Better than Apples to Apples, I'd say. Could use room for improvement, I've been meaning to put together a combination of the full game and expansions that my whole family can play
MrQuallzin 4 weeks ago • 100%
The Thought Emporium is currently working on getting rat neurons to play Doom https://youtu.be/bEXefdbQDjw. Pong is a great first game to get things to play
MrQuallzin 4 weeks ago • 100%
I always read it as Law Enforcement Officer
MrQuallzin 4 weeks ago • 87%
Google image search gives me this guy, which sounds and looks right http://www.namethatplant.net/plantdetail.shtml?plant=1639
MrQuallzin 4 weeks ago • 87%
I'd love to be on a GLP-1 (Ozempic, Wegovy, Mounjaro, etc). I've had Wegovy prescribed, but my plan excludes it and the others unless you have diabetes.
It's definitely one of the current "trendy" prescriptions in the USA right now, which I hate since a lot of people are using them as "get thin quick" hacks that will fix their life. Being a 300lb guy without diabetes where general diet and exercise aren't dropping the pounds, my prescriber said I'd be a perfect candidate for it.
MrQuallzin 4 weeks ago • 81%
Is this in regards to a specific recent event or article? Or just purely hypothetical?
In practice, an AI that's trained on drug-drug interactions, duplicate therapies, and common dosings would be beneficial. We already have specialized models that are helping scientists discover groundbreaking technologies, such as recent advancements in discovering cancers years before we are used to with more traditional methods.
Let's look at your hypothetical. Prescriber sends in an order to their in-house pharmacy for amoxicillin and the patient has a recorded penicillin allergy. Under ideal circumstances, the pharmacist would review the patients chart, note the potential for a reaction (While they are different antibiotics, there is still potential for a reaction due to the drugs being related), and contact the prescriber to verify therapy and discuss if a change to another antibiotic is in order. (This is all ignoring the fact that for an ear infection you'd likely get an otic ear drop, not an oral suspension. Something like Neo-Poly-Dex or ofloxacin).
Unfortunately the pharmacy hellscape we're in today leads to rushed verifications, where therapies aren't being checked too closely and many things get missed. Pharmacies already have systems in place to warn techs and pharmacists of any interactions with recorded allergies, but if you're traveling or need to go to a new pharmacy or doctor, things get missed.
An AI that is trained on these specific things would help alleviate some of the pressure of the already overworked pharmacy staff, while giving consise and consistent information. If a pharmacist misses an allergy or interaction, the AI could send a warning to them and the prescriber.
Note that I'm referring to job specific AI, that are trained for specific purposes. A general LLM, which it sounds like you're referring to, would not be able to work in these environments.
Source: I audit pharmacy claims, with training in retail, LTC, and PBM pharmacy settings. It's literally my job to catch the errors (both billing and clinical) that pharmacies make.
MrQuallzin 1 month ago • 88%
To preface, I am not defending the police or the piece of shit abuser. This was handled extraordinarily horrendously. Police even knew about the guy's crimes and let him off without a slap on the wrist.
The basis of my thoughts comes from this paragraph in the article:
Police said that Kizer travelled from Milwaukee to Volar's home in Kenosha in June 2018 armed with a gun. She shot him twice in the head, set his house on fire and took his car.
I don't know any info beyond what the article gives, but it sounds like at that point she wasn't being held captive and murdered to get away from her abuser. She actively plotted and had the freedom to travel and kill him. Unless there's something I'm missing, I don't think I could consider this as actively being self defense.
MrQuallzin 1 month ago • 100%
Oh yeah, I'm not unaware of the quality loss over the years. It's an occasional craving for their particular taste. Love the sweet onion chicken teriyaki.
It's the customer service that really tanked here (I'm in the affected area from what I can tell). It seemed like there were never more than 2 people working at any of the stores here, even during busy hours. Wouldn't surprise me if the owner was responsible for that as well.
MrQuallzin 1 month ago • 100%
I'm curious if this is why the stores here have been lackluster for the last couple years. General fast food getting worse overall, but the Subways have been pretty bottom of the barrel. Article said the stores are going to be sold to a new "experienced" franchisee, so hopefully when they reopen they have a higher quality.
MrQuallzin 1 month ago • 100%
It depends on your client. In Sync, you need to click into the post then the image to get full resolution. Clicking the image from the front page just blows up the thumbnail
MrQuallzin 1 month ago • 100%
On X alone, the Republicans for Harris group already has more than 100,000 followers, and organizers said more than 70,000 people watched the rally.
Those aren't insignificant numbers. If those who were there can convince their circles as well, that could expand drastically.
MrQuallzin 1 month ago • 100%
It was definitely smoother this time around. SE had an easier time for sure, since they didn't need to stop people buying it like during Endwalker
MrQuallzin 1 month ago • 100%
Same, been using it long before it was bought by Microsoft. It has customizations I like, and (when it works properly) I can copy and paste between my phone and computer.
I'm working on 3D printing the [Kubic](https://www.instructables.com/Kubic-a-Printable-ITX-PC-Case-With-a-Handle/) case, but would like some guidance on hardware to buy for it. I currently have an old laptop running some Docker containers, including the .arr stack and Plex, plus Immich for photo backups, and a few other odds and ends. Don't want to break the bank, but I'm looking for something to at least handle transcoding video for Plex. Needs: - ITX Motherboard - Discreet GPU (Max 210mm long, 2 slots thick (max 41mm)) - SFX Power Supply - 140mm chassis fan (Max 30mm thick) Thanks in advance!
Hello fellow self-hosters, I'm fairly new to hosting my own services and have been learning as I go, but have run into an issue and am not sure where to look for answers. Hoping you all can help a confused soul out. Up until now, I've been running the .arr services (Sonarr, Radarr, Overseerr, etc.) on my Windows machine with minimal issue, but I've been working on setting up a separate Debian machine to get it off my main PC. I'm following [this guide](https://github.com/Rick45/quick-arr-Stack) to get everything setup, and at this point I have all my services setup and running, but I can't seem to get Radarr and Sonarr to work correctly. My indexers work, Radarr will grab the wanted file and Deluge will download it, but when the download finishes it just stays in limbo; Radarr is unable to import it into the library due to invalid permissions (It doesn't have Write permissions). I've done `sudo chown -R $USER:$USER /path/to/ROOT/directory` and `sudo chown -R $USER:$USER /path/to/HDDSTORAGE/directory` as the guide instructs under 'Folder Structure' (of course replacing the paths with my actual paths), but to no avail. Where I *think* the problem is is my actual Media Library. All the services are running on their own laptop, but my 10TB HDD is still in my main Windows PC. Until I build a new rig specifically for the server, I can't put the HDD into the laptop. In Windows, the TV and Movie folders are network shared and I have them mounted on my server in the respective locations where Radarr and Sonarr should be looking. At this point, the .arr services can definitely read the mounted directories, but can't make new ones for new shows and movies.
My wife's birthday is coming up and she is HUGE into the Sonic franchise, but doesn't have much in the way of collectibles or memorabilia. What would a Sonic fan who's played the games, read the comics, knows the lore, etc. LOVE to get as a gift? I'm thinking rare collectible type stuff. Likely something I'll need to get off eBay.
Pacific Northwest, southern Washington. Found during a walk in the woods
Anyone have any solutions for this issue? You'd think it would just bridge over the entire hole, don't know why it's doing this. We're at 195mm height here and I'd rather not run a support the entire height of the model just for this little nub. Using version 2.6.1 Edit: Model in question https://www.thingiverse.com/thing:5551428. Not my own, but getting some fun things printed for the Spooky season
Hello fellow printers! I've decided to be ambitious and upgrade my printer's hotend. I followed [this](https://github.com/wannabecoffeenerd/Annex-Engineering_User_Mods/tree/main/Extruders/Sherpa_Mini/Toolheads/Churls-Stiffy_E3) guide to convert my printer to a direct drive. I bought [this](https://www.printedsolid.com/products/ldo-nema-14-motor-ldo-36sth17-1004ahg) NEMA14 motor per the instructions, but the instructions didn't specify how to wire it up to the stock Neptune 2S board. I just swapped it where the old extruder was and got everything assembled. Started trying to tune it (Using Klipper), and things just got weird. I read that the motors can heat up while active, but this motor is getting HOT! Hot enough that it can melt PLA that's pressed up to the motor's body. Only takes a few minutes to get there, definitely can't print for long with it. What are my next troubleshooting steps? I definitely don't want to burn my house down and will go back to my original bowden setup if needed, but I'd love to be direct drive. Edit: Of course *after* I post this I finally find what's wrong. Need to tune VREF as well. I've ordered some ceramic screwdrivers to prevent accidentally frying my board and will be learning something new this weekend! Leaving this question here in case someone else needs the answer. Using [this](https://www.inov3d.net/stepper-calibration-tune-your-vref-steps-for-perfect-prints/) guide to tune VREF
Updated to the latest update and the app crashes immediately. Can't get to any settings, no errors are thrown. I've had to downgrade to v23.08.31. Anyone else having problems? ~~I can post my device info if someone could tell me how to get that.~~ Edit: Device info added. Also, I do have an Ultra subscription but can't restore the purchase. That's probably since I downloaded the earlier version from APKPure. **Device information** Sync version: v23.08.31-14:10 Sync flavor: googlePlay Ultra user: false View type: Cards Push enabled: false Device: cheetah Model: Google Pixel 7 Pro Android: 13
Took a couple failed prints to figure out something was wrong. Pulled the filament and saw it was melted WAY too high! Thankfully I've got a pack of spares, so pretty simple to swap out.
Now I need to learn how to play it...
Harley Benton DIY kit ordered from Thomann, body 3d printed. Now to learn how to play it
Next step is learning to use filler, sanding, and painting