robber 1 week ago • 100%
IIRC there is a plugin for Caddy that can do what you are looking for.
Edit: here you go
Most relevant section translated to english: If he (Trump) wins the election on November 5, his billionaire supporter Musk will chair the new board. This is to implement a full financial and performance audit of the entire government and make recommendations for drastic reforms. Source: [Swiss state media article](https://www.srf.ch/news/international/us-wahlen-2024/us-praesidentschaftswahl-2024-regeln-fuer-trump-harris-duell-stehen-fest)
robber 3 weeks ago • 100%
Your comment reminds me of that great tune by Pink Floyd.
robber 4 weeks ago • 100%
Probably not what OP is looking for.
But I'm also happy with my Garmin Instinct. I use it disconnected from my phone, it does everything I need offline and stand-alone. To add tracks for navigation I just connect it to my linux laptop and drop the GPX file into the NewFiles (or whatever it's called) folder on the watch. I was surprised how well it works without official apps. The only thing I used the app for was to update the firmware when I bought the watch.
Also, fittrackee looks promising - thanks for the tip!
robber 4 weeks ago • 100%
I would second that. I currently use nix besides Flatpaks for development environments but also find it somewhat overcomplicated. Looking forward to give toolbx a try.
robber 1 month ago • 100%
I migrated my home- and webservers from Debian to FCOS a while ago and I'm very happy with how everything works.
Troubleshooting butane/ignition was a bit of a pain in the butt but worth it imo. I suggest just reading through the FCOS docs, they guided me well while setting everything up. I use podman on my webservers and docker on the homeserver (bc nextcloud aio is not fully podman compatible). I use the installer to build a pre-configured ISO that I can deploy where I want to.
Someone in the comments mentioned Flatcar, which I think looks compelling as well, since it's basically the same but more of a community effort.
robber 1 month ago • 87%
I think this is a step in the right direction. Everyone can lose a portable device or it can get stolen, so protecting the potentially sensitive data is important.
I think what people are complaining about is not full-disk encryption itself, but the fact that people are not used to being responsible for their cryptographic keys.
I think we should educate people regarding this responsibility. We did it with regular keys we use to unlock our homes.
robber 2 months ago • 100%
No radio expert here, but would'nt this at some point interfere with the transmissions if deployed at a large scale?
robber 2 months ago • 100%
I do where possible, but it's not always available.
A couple of years ago, QR-bills were introduced in Switzerland as a means to make payments easier. My bank provides an app to scan the QR codes, which I prefer not to install. The only other option they provide to scan the codes is to use the webcam. Am I supposed to print my digital bills to have my webcam scan them again? Just let me upload a goddamn screenshot.
robber 2 months ago • 100%
Does not answer your question, and someone already mentioned it in a thread, but don't forget zram when only 4GBs are available.
robber 2 months ago • 100%
I went to a small (~30 people) festival dedicated to wood carving, because I was asked if a wanted to cook for everyone. Found it very inspiring to get an impression of that very specific sub culture.
robber 3 months ago • 100%
A little overconfident as usual imo
robber 3 months ago • 100%
Swiss lemming here. Switzerland already open-sourced multiple projects before, most notably the app to store your COVID test / vaccination status in. It was even officially available on F-Droid. I was very suprised at that point, and I'm happy to see that there are now efforts to make such behavior more default and less edge case, even when there are exceptions.
robber 3 months ago • 100%
Yes, you can just go ahead and install nix in your distro to use e.g. nix-shell
to create a development environment.
robber 3 months ago • 100%
I recently switched to Debian and use nix to install / provide the likes of node / python / go for development.
robber 3 months ago • 99%
Step by step, it seems, YouTube is evolving into something that has previously been called TV.
robber 4 months ago • 100%
Totally agree, that would be even better.
robber 4 months ago • 96%
I totally agree regarding making it optional, but I have to say the idea of auto generating alt texts sounds like a really useful application of AI - no one really likes to do that manually yet a significant number of beautiful people rely on it.
robber 4 months ago • 66%
Same problem here, my company requires 2FA for remote network access. MS Authenticator requires Google Services on Android which I don't have - so no home office for me I guess.
robber 4 months ago • 100%
To be fair, there are a lot of Flatpacks published by the devs themselves (especially in the Gnome/GTK ecosystem).
robber 4 months ago • 100%
Sounds like a rather frustrating journey for you.
robber 4 months ago • 100%
Thanks! Glad to see the 8x7B performing not too bad - I assume that's a Mistral model? Also, does the CPU significantly affect inference speed in such a setup, do you know?
robber 4 months ago • 100%
So you access the models directly via terminal? Is that convenient? Also, do you get satisfying inference speed and quality with a 16GB card?
I've been looking into self-hosting LLMs or stable diffusion models using something like [LocalAI](https://localai.io/) and / or [Ollama](https://ollama.com/) and [LibreChat](https://www.librechat.ai/). Some questions to get a nice discussion going: - Any of you have experience with this? - What are your motivations? - What are you using in terms of hardware? - Considerations regarding energy efficiency and associated costs? - What about renting a GPU? Privacy implications?
robber 4 months ago • 100%
IIRC extensions are sadly not a part of stable Gnome Web yet.
robber 5 months ago • 100%
Believe it or not, she's now running a graphics design studio.
robber 5 months ago • 100%
My sister and I figured out that we could draw. On the windshield of our neighbours car. Using stones.
...
robber 5 months ago • 100%
That sounds familiar. Remember when we used to watch TV?
robber 5 months ago • 100%
That one looks cool! GPS receiver makes it interesting compared to the pine time.
robber 5 months ago • 50%
robber 5 months ago • 50%
robber 5 months ago • 100%
Why exactly are the IBM dependencies a problem for you?
I guess I just like independent, community-driven distros, since there's less space for financially motivated enshittification. Just shortly after I decided to go with FCOS, RedHat / IBM decided to close down CentOS, for example.
I can’t really find good resources on how FCOS is working and what are the benefits. Is it updating the system/kernel automatically as well as the containers?
The system & kernel yes. The whole system is basically a read-only system "image" for which the devs make sure all the packages play nicely together. Packages are not updated individually, but whole system "image" are released periodically, which the system then downloads automatically and reboots (you decide when it actually reboots through the config). If anything goes wrong, the system is rolled back to the previous "image".
When you go with podman, there's a systemd service you can enable which will update the containers (i.e. pull the specified image tag). I'm not aware of a similar mechanism for Docker, which is why I use watchtower for that which has been working smoothly so far.
Edit:
And what are generally, in your opinion, the advantages of FCOS?
For me, it's the (quite safely designed) auto-updates of the base system (I just feel like having to do less repetitive work), infrastructure-as-code aspect, and the container mindset (as I containerize everything anyways). Also I just have a weakness for new, fancy stuff.
robber 5 months ago • 100%
I use Fedora CoreOS on my homeserver and a bunch of VPSs. Migrated the homeserver just recently, but I've migrated the first VPSs a bit more than a year ago. So far, I had no problems with it. There's a low-traffic mailing list where the devs inform about security issues and breaking changes to the whole container stack.
I used debian before for some years, but at some point became tired of manually updating the system (which is probably one of the biggest benefit of FCOS). It takes, however, quite some time to put your first Ignition config together, and debugging is tedious as you have to redeploy to see if a bug / error is now gone (I've used a VM for that).
I use podman on some, Docker on other servers (you can't use both at the same time). Both have been working well so far.
I'd recommend it, but would also recommend taking a look at Flatcar Linux which is more or less the same without the IBM dependency (which makes my stomach hurt sometimes).
robber 6 months ago • 100%
I just use a bunch of markdown files for that. Guess you could also use Notes and its category feature.
robber 6 months ago • 100%
Nextcloud all the way. I especially love the calendar, contacts and notes integrations besides the file sync, and it's extensibility in general. Such a powerful tool.
robber 6 months ago • 100%
Only Chinese code is present, namely [lists three linux distros]
Linus Torvalds: *clears throat*
robber 6 months ago • 100%
Title: "top places in the world [...]"
Content: just about OECD countries
Implication: OECD = the world
robber 7 months ago • 100%
Just imagine the license fees.
robber 7 months ago • 75%
Receiving a Librem 5 as a gift, having fun for a weak and then trade the thing for a steamdeck - sneaky Vanta.
robber 8 months ago • 100%
From an idealistical point of view, sure freedom of choice is the way to go.
What makes me nervous is that Safari has been the only big player left besides chrome in regard to usage share on mobile. So while from an idealistical point of view the ban of other engines was certainly a bad thing, it still helped to prevent google from extending its monopoly.
robber 8 months ago • 95%
The fact chromium based browser are going to be allowed as well makes me nervous.
Just wanted to share my happiness. AIO is the new (at least on my timeline) installation method of Nextcloud, where most of the heavy-lifting is taken care of automatically. https://github.com/nextcloud/all-in-one
Open your mind!