ForynGilnith 9 months ago • 100%
If that's the case, it's a bit of an ugly hack but you could make a wrapper script placed in /usr/local/bin/inkscape
like this:
#!/bin/bash
flatpack run org.inkscape.Inkscape ${*}
(the ${*}
will pass along all the arguments that the wrapper script was called with)
Are there any wayland-native, pretty and simple calculator apps that work well with hyprland? Any recommendations?
ForynGilnith 1 year ago • 100%
Bonus pic... Here is another one at the bird bath
ForynGilnith 1 year ago • 100%
Excuse the slightly blurry shot from holding my phone up to my spotting scope
ForynGilnith 1 year ago • 100%
I use 101domain.com
They're not always the cheapest option but they seem to support a lot of TLDs and their customer support is always fast and staffed by actual humans.
ForynGilnith 1 year ago • 100%
Does lemmy.world federate with midwest.socal? Searching for !succulents@midwest.social
on lemmy.world returns no results 😥
edit: testing link
ForynGilnith 1 year ago • 100%
It's not my personal patch - I'm just watching it. If it misses a release because the author doesn't respond I'll try and put some time into writing my own implementation.
Because it's "in cygnus or in health"
ForynGilnith 1 year ago • 100%
I believe that this Pull Request is trying to add this feature: https://github.com/dessalines/jerboa/pull/514
Hopefully it gets merged and then released, it would be nice to have this feature (that's how RIF behaved before)
ForynGilnith 1 year ago • 100%
But how about teeth?
ForynGilnith 1 year ago • 100%
Ah interesting - that makes sense. I didn't think to treat it like an image mask like that. Thanks!
ForynGilnith 1 year ago • 100%
Thanks! I've made lots of wide area and close-up terrain models using DEM and lidar before, but trimming to state boundaries has always been the challenge. Every time I try to trim the raster data in qgis I don't get anywhere, even though it should be possible.
The OpenSCAD primitive is a new one for me though - thanks! In the past I've just used the DEMto3D plugin in qgis.
Wondering if others experience this or if it's just my setup. I've tried searching for open issues that describe this behavior but haven't had much luck yet. I believe it only affects GTK apps but when I'm at an input text box on an app, hitting ctrl-a doesn't actually select all the input most of the time. If I hold ctrl-a for a few seconds, it eventually succeeds. This only happens to me in hyprland. If this isn't a known issue I'll put more time into describing it and testing exactly which input dialogs are affected.
ForynGilnith 1 year ago • 100%
The real theme is not what you say, but who you are deep inside...
Does anyone know of a good resource to download or generate terrain / elevation STL models that are bound to the shape of US states? I came across [this posting](https://www.thingiverse.com/thing:1524543/files) but the files are pretty low resolution and look pretty bad at the size I want to print.
ForynGilnith 1 year ago • 100%
cool - I'll try to run my images through InVesalius instead. Thanks for inspiring me to give this another shot!
ForynGilnith 1 year ago • 100%
How did you assemble the STL? Freesurfer?
I had some MRIs done about a year ago that included the brain and I got so/so results out of Freesurfer. You could tell it was a brain but it still looked a little janky. Yours looks great, though!
ForynGilnith 1 year ago • 100%
Thanks! Per my other comment, I guess I've gotta look at Z-Wave if there are no wifi-only options available. Checking out the T6 Pro now
ForynGilnith 1 year ago • 100%
Thanks - I'll take a closer look at Z-Wave again. I'm only running wifi based devices so far but if this is the only way to get better thermostat control I might have to compromise.
Can anyone recommend a thermostat system that is self-hosted (no third-party cloud) and integrates into homeassistant nicely? Something tasmota based would be even better. This is the final bit of home automation that's been difficult to solve. I've got a heat pump system and there are very few smart thermostat systems that aren't beholden to a public cloud service.
ForynGilnith 1 year ago • 100%
I had many issues running Arch+Wayland+nvidia because, as a long-time i3 user, I figured that migrating to Sway would be the best choice based on so many people in the community talking about it. I tried moving over several times, every few months to see if the experience had improved but each time I got frustrated with how terrible and buggy the environment was.
Trying out Hyprland was a complete game-changer. I've been running it full-time for about 2 months and it's completely stable, supports everything I need to run, and is more efficient: the battery on my laptop lasts about 30% longer compared to my i3/picom/X11 setup.
So yeah, I highly recommend Hyprland if you've tried sway in the past and didn't get anywhere with it.
ForynGilnith 1 year ago • 100%
Yeah, I dunno... Twitter seemingly intentionally committing suicide too, all in such a short amount of time.
My tinfoil hat wearing side wonders if this is all coordinated because of the election coming up next year, but the more likely explanation is interest rates and tightening capital forcing these shitty new monetize-at-all-costs actions.
They're active from Ducie Island right now. I've only managed to pick them up on 20m so far.
ForynGilnith 1 year ago • 100%
Not recently... I'm just completely out trust and benefit of the doubt based on the various controversies and where their (Tencent) money is coming from.
ForynGilnith 1 year ago • 100%
Well said - my patience ran out about 6 or 7 "mistakes" ago. I'm never going back.
ForynGilnith 1 year ago • 100%
For me, they'd have to
- Replace /u/spez
- Implement some sort of publicly auditable accountability re: shadowbans and database-level comment editing
- Open-source significant parts of their platform.
I have zero expectation that any of these things will happen. The most healthy way forward, for an open and free internet, is the meritocracy of the fediverse.
ForynGilnith 1 year ago • 100%
Wow... managed to find the original post from 2004. This is the slashdot news story that got me started with e17 nearly 20 years ago.
ForynGilnith 1 year ago • 100%
ForynGilnith 1 year ago • 100%
Hah yeah that brings back memories. I remember - even though time is limited by thirst & hunger stats - sticking around in a level just because the tempo was picking up around this part of "Atmosphere 4"
ForynGilnith 1 year ago • 100%
Ahhh, e17 - I've got memories of building it from either cvs or svn at the time as soon as it was announced by rasterman on Slashdot.
e17 was my daily driver for a long time. It looked very pretty, before compositing was even a thing on the desktop, all without sacrificing performance. The biggest downside was that it wrote its configs as binary blobs which frequently broke as new development releases came out.
ForynGilnith 1 year ago • 100%
My heart still belongs to enlightenment/e17 but I've been using i3 for the past few years, and then hyprland for the last 4 months or so. It's working out well.
This one was taken during a "we've gotta get out of the house and do something...anything!" phase during the pandemic. Only the main cave was open, but it was still a great visit to a very unique national park. We hope to go back some day now that the rest of the caves are open and guided tours are back on.
This brought back memories when looking for something to post in this new community. This picture was taken during my trip to Pinnacles National Park in 2015, which was two years after President Obama redesignated it from a monument to a National Park.
The best part about cats is the face they make when you make a funny sound.
I used to love playing this game back in the day. Awesome soundtrack and very fun mechanics. Apogee Software!
ForynGilnith 1 year ago • 100%
I picked up some cheap blueberry bushes from a local nursery and planted them in the ground this weekend. I had tried growing them about 3 years ago but it didn't work out.
These ones are hooked up to irrigation now and they're in a better spot so fingers crossed!
ForynGilnith 1 year ago • 100%
We're not sure - when we adopted her as a kitten from the shelter they called her "domestic shorthair" but she poofed out and got long haired around 1.5yrs old.
ForynGilnith 1 year ago • 100%
Using hyprland+nvidia, I've had good luck using this screen_shader command:
hyprctl keyword decoration:screen_shader /path/to/flux.glsl
Where flux.glsl
is
// blue light filter shader
// values from https://reshade.me/forum/shader-discussion/3673-blue-light-filter-similar-to-f-lux
precision mediump float;
varying vec2 v_texcoord;
uniform sampler2D tex;
void main() {
vec4 pixColor = texture2D(tex, v_texcoord);
// green
pixColor[1] *= 0.855;
// blue
pixColor[2] *= 0.725;
gl_FragColor = pixColor;
}
ForynGilnith 1 year ago • 100%
Ow! Hit me right in the wallet.
Thanks for creating this - I really hope it takes off!